| Customized: | Customized |
|---|---|
| Certification: | RoHS, CE, TUV |
| Brand: | Rule |
| Samples: |
Plastic
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Capillary Thermostat applied in a number of electrical appliances. According to the customized specifications, it could be made to control temperature from -45°C ~ 80 °C.The small mechanical temperature regulators are used to control electric heaters or cooling filter fans in electric cabinets, which are accidents caused by temperature factors. Widely used in communications, wind power generation, firefighting equipment, ships, petrochemicals, large factories, coastal factories, docks, water treatment facilities, equipment, etc.
1)Designed temperature range: -45°C ~ 80 °C
2)Max.heat resistance of the body: 80°C
3)Control type: mechanical temperature controller
4)Operating life: ≥ 100,000times
5)All series of temperature controllers can be customized on request.
controller small compact normally closed thermostat for switching signal device
Working principle of thermostat:
Due to the different coefficient of thermal expansion, the degree of thermal expansion and cold contraction of bimetal sheet is different when the temperature changes, so the bending degree of bimetal sheet changes at different temperatures.
When the temperature is higher than the expansion temperature of bimetal sheet, the contact position of bimetal sheet is deformed and the circuit is disconnected.
When the temperature is lower than the expansion temperature of bimetallic sheet, the contact position of bimetallic sheet will return to the original shape and close, and the circuit will close.
There are two types of temperature controller: normally open and normally closed
Normally closed: when the temperature is set, the temperature controller is in the normally closed state. When the actual ambient temperature drops to or approaches the set temperature, the load heating will be started. Generally, the temperature controller is in the normally closed state. When the actual ambient temperature is greater than the set temperature, the load is always in the shutdown state.
Normally open: when the temperature is set, the temperature controller is in the normally open state. When the actual ambient temperature is higher than the set temperature, the load cooling will be started. Generally, the temperature controller is in the normally open state. When the actual ambient temperature is lower than the set temperature, the load is always in the shutdown state.
| Switch temperature difference | 7K (± 4K tolerance) |
| Sensor element | thermostatic bimetal |
| Contact type | snap-action contact |
| Contact resistance | < 10mOhm |
| Service life | > 100 000 cycles |
| Max. switching capacity | 250VAC, 10 (2) A |
| 120VAC, 15 (2) A | |
| DC 30W | |
| EMC | acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
| Connection | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm⊃2;, stranded wire (with wire end ferrule) 1.5mm⊃2; |
| Mounting | clip for 35mm DIN rail, EN50022 (or for exit filter EF 118 Series) |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operating/Storage temperature | -20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F) |
| Protection type | IP20 |
Packaging
1) plastic bag + carton
2) wooden box
Customized instructions:
Dear customer: Hello! Because all the products of our company for the factory are customized products, you need to communicate with the customer service staff to determine the model, specification, color, size, quantity, whether it can be customized and other relevant information, so before the buyer buys any product in the store, please ask the customer service staff about the purchase, thank you for your cooperation!
Q: who are we?
A:We are a factory, we can guarantee our price is first-hand, very cheap and competitive. We are based in Zhejiang, China, start from 2004,sell to all over the world.
Q: how can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q:what can you buy from us?
Energy regulator
Thermostat
Thermometer
Section Switch
Heating element
Leakage current protective plug
Q:How long is your delivery time?
A: Generally it is 2 days if the goods are in stock. or it is 10-20 days if the goods are not in stock, it is according to quantity.
Q:Could you manufacture the products according to my drawing or sample?
A: Yes,we also could manufacture the products according to customer's drawing or replicate sample.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}